Home > Degree Level Essays > The Built Environment > Engineering
Engineering
- Sort by
- Mark
- Question
- Year
- Words
- Date submitted
Question: ELECTRICAL AND ELECTRONIC
PRINCIPLES –
APPLICATION OF CIRCUIT
THEORY
(BTEC HIGHER NATIONAL CERTIFICATE IN ENGINEERING)
Answer: AIMS 1. This laboratory assignment provides an opportunity to: a) Investigate circuit...
- Subject: Engineering
- Course: Engineering
- Level: Degree
- Year: 1st
- Mark: 70%
- Words: 2796
- Date submitted: January 05, 2009
- Date written: Not available
- References: No
- Document type: Essay*
- Essay ID: 2623
Question: Development of the Economizer
Answer: As of this writing, the economizer has been built, pressure tested and...
- Subject: Engineering
- Course: Engineering
- Level: Degree
- Year: 2nd/3rd
- Mark: 67%
- Words: 1697
- Date submitted: September 28, 2009
- Date written: Not available
- References: No
- Document type: Essay*
- Essay ID: 2155
Question: Engineering Surveying Fieldwork Project 1 – Levelling
Grade B
Answer: Introduction Levelling is the operation to determine the relative height of points...
- Subject: Engineering
- Course: Engineering Surveying
- Level: Degree
- Year: 1st
- Mark: 65%
- Words: 1080
- Date submitted: January 09, 2014
- Date written: Not available
- References: No
- Document type: Essay*
- Essay ID: 5317
Question: Case study. Energy saving home improvements. Grade B
Question: Environmental Science Assignment 1
Answer: Introduction: When planning improvements to a building, there are many ideas that...
- Subject: Engineering
- Course: Environmental Science
- Level: Degree
- Year: 1st
- Mark: 65%
- Words: 1428
- Date submitted: January 09, 2014
- Date written: Not available
- References: No
- Document type: Essay*
- Essay ID: 5316
Question: Fieldwork Project 1 – Angular Measurement
Engineering Surveying Grade B
Answer: Introduction Angular measurement is the operation to determine the horizontal and vertical...
- Subject: Engineering
- Course: Engineering Surveying
- Level: Degree
- Year: 1st
- Mark: 65%
- Words: 991
- Date submitted: January 09, 2014
- Date written: Not available
- References: No
- Document type: Essay*
- Essay ID: 5315
Question: Report title: Tensile Test
Answer: An experiment was carried out at the City University, in order to...
- Subject: Engineering
- Course: Aeronautical Engineering
- Level: Degree
- Year: 2nd/3rd
- Mark: 65%
- Words: 1110
- Date submitted: July 12, 2009
- Date written: Not available
- References: No
- Document type: Essay*
- Essay ID: 1874
Question: The Trifilar Suspension - Title :
Determination of moment of inertia of a uniform rectangular bar and a connecting rod using the trifilar suspension, and by swinging the connecting rod as a compound pendulum.
Answer: Introduction : Moment of Inertia can be described as a measure of...
- Subject: Engineering
- Course: Aeronautical Engineering
- Level: Degree
- Year: 1st
- Mark: 64%
- Words: 1000
- Date submitted: May 05, 2008
- Date written: January, 2003
- References: No
- Document type: Essay*
- Essay ID: 2617
Question: FLUID FLOW IN A DUCT OF VARYING CROSS-SECTION
Answer: The purpose of this experiment was to demonstrate the relation between pressure...
- Subject: Engineering
- Course: Aeronautical Engineering
- Level: Degree
- Year: 2nd/3rd
- Mark: 64%
- Words: 1510
- Date submitted: July 12, 2009
- Date written: Not available
- References: No
- Document type: Essay*
- Essay ID: 1873
Question: ASSESS THE RESPONSE OF THE LATERITIC CLAY COMPONENT OF A LANDFILL LINING SYSTEM TO EXPOSURE TO LANDFILL LEACHATES
Answer: Solid wastes comprising refuse, garbage, sludge, slurries, etc. are unwanted heterogeneous materials,...
- Subject: Engineering
- Course: Geological Engineering
- Level: Degree
- Year: 2nd/3rd
- Mark: 63%
- Words: 2543
- Date submitted: July 12, 2009
- Date written: March, 2006
- References: Yes
- Document type: Essay*
- Essay ID: 1875
Question: The Disposable Diaper Industry in 1974
Answer: The disposable diaper industry was a dynamic business and suffered many changes...
- Subject: Engineering
- Course: Engineering
- Level: Degree
- Year: 2nd/3rd
- Mark: 60%
- Words: 5370
- Date submitted: April 17, 2009
- Date written: Not available
- References: No
- Document type: Essay*
- Essay ID: 1420
